| Tube Pullers |
|
|
|
Skatoskalo Tube Pulling Guns
are provided with a window on the jaw actuator, which does not allow the
rust or dust to accumulate between the jaw and jaw actuator.
Another advantage of providing this window
allows the gun to be removed in an emergency during pulling operations,
just stop the gun and insert the fork, this disengages the jaws and allows
the gun to be removed. |
| |
Model
|
| SHPG-15 |
SHPG-30 |
SHPG-45 |
| Pulling Capacity (Force) |
15 ton at 350 bar |
30 ton at 350 bar |
45 ton at 350 bar |
| Free Pulling Speed with TPP-50 |
3.5m/min |
2.3m/min |
1.8m/min |
| Free Pulling Speed with TPP-75 |
4.5m/min |
3.0m/min |
2.4m/min |
| Free Pulling Speed with PPP-50 |
3.8m/min |
2.5m/min |
2.0m/min |
| Minimum Tube O/D (Continuous) |
9.65mm (3/8") |
9.65mm (3/8") |
25.4mm (1") |
| Maximum Tube O/D (Continuous |
25.4mm (1") |
38mm (1.1/2") |
76mm (3") |
| Stub Pulling Capacity |
up to 38mm
(1.1/2") |
up to 76mm (3") |
up to 102mm (4") |
| Pull Stroke |
150mm (6") |
150mm (6") |
150mm (6") |
| Weight |
25kg (55 lbs) |
50kg (110 lbs) |
61kg (135 lbs) |
|
|
Hydraulic Stub Pullers
|
|
 |
- Compact and lightweight package
- Makes tube removal simpler and easier
- Foot pedal control for operator use
|
|
Tube Cutters |
|
 |
Internal Tube Cutters quickly
cut through the walls of tubes in condensers and other heat exchangers to
aid removal from tube sheet. Two types are available for ferrous an
non-ferrous tubes.
|
| "Push Type" Internal Tube Cutters
quickly cut through the walls of ferrous tubes in Condensers and other
Heat Exchangers as a step in their removal from tube sheet. This sturdy
"Push Type" Internal Tube Cutter can be used with a portable
Electric or Air Drill Machine. "Push Type" Cutter is simple to
operate. Merely insert it into the tube, apply power, press inward and the
tube can be cut in a few seconds. Releasing of inward pressure
automatically retracts the Cutter Bits. This Cutter is equipped with an
adjustable collar suitable for reaching into tubes of various distances.
Sizes
from 15.9mm (5/8") to 38mm (1.1/2") O/D
|
| "One Revolution" Internal Tube
Cutter pierces and cuts non-ferrous tubes as a step to aid removal from
the tube sheet. Designed for hand
operation using a Ratchet handle. The Cutter Tool Bit operates on an
eccentric principle. The Tube Cutter is entered into the tube with the
Tool Bit in the closed position. When turned the Tool Bit contacts the
tube and pierces the tube wall and as turning is continued the Tool Bit
shears through the tube along its circumference. This Cutter is fitted
with an adjustable collar enabling it to reach into tubes up to various
distances. It is available in 6" and 10" reaches for both metric
and imperial sized tubes.
Sizes
from 12.7mm (1/2") to 63.5mm (2.1/2") O/D |
