Top plate tube expansion in pans, juice heaters with sugar
mills. Sizes range from 38.1mm (1 1/2") to 114.3mm (4 1/2").
STE CSB Series
Bottom plate tube expansion in pans, juice heaters within
the sugar mill. Tube sizes from 44.5mm (1 3/4") to 101.4mm (4")
O.D.
STE114 Series
The STE114 series is a "general purpose" expander
for expanding and flaring boiler tubes, waterwall, downcomer, economiser,
riser and airheater tubes. Tube sizes from 50.8mm (2") to 114.3mm (4
1/2") O.D. - Tube Sheet 12.7mm (1/2") to 66.7mm (2 5/8")
STEA Series
The STEA series is a cost effective tool used in
applications where only a small number of tubes require expanding without
flaring. Tube sizes from 22.2mm (7/8") to 114.3mm (4 1/2") O.D.
Tube sheet 12.7mm (1/2") to 66.7mm (2 5/8")
STEAF3 Series
The STE AF3 series is a cost effective tool used in
applications where only a small number of tubes require expanding with
flaring. Tebe sizes from 22.2mm (7/8") to 114.3mm (4 1/2") O.D.
Tube sheet from 12.7mm (1/2") to 66.7mm (2 5/8")
STEAB Series
The STEAB series is a high productivity tool designed with a
thrust assembly where flaring is not required. Tube sizes from 50.8mm
(2") to 114.3mm (4 1/2") Tube sheet 12.7mm (1/2") to 66.7mm
(2 5/8")
STE-ABF3 Series
The STEABF3 series is a high productivity tool designed with
a thrust assembly where flaring is required. Tube sizes from 50.8mm
(2") to 114.3mm (4 1/2") Tube sheet 12.7mm (1/2") to 66.7mm
(2 5/8")
STEAB LR Series
The STEAB LR series is a high productivity tool designed for
thick tube sheets where flaring is not required. Tube sizes from 50.8mm
(2") to 114.3mm (4 1/2") O.D. Tube sheet 38.1mm (1 1/2") to
76.2mm (3")
STE ABSR Series
The STEAB SR series is a high productivity tool designed for
thick tube sheets where flaring is required. Tube sizes from 50.8mm
(2") to 114.3mm (4 1/2") O.D. Tube sheet 38.1mm (1 1/2") to
101.6mm (4")
STEV Series
STEV series expander is used for repair and erection of
boilers having thin tube sheets. It is approximately twice as fast as
conventional tube expanders. Tube sizes from 25.4mm (1") to 76.2mm
(3")
STECBE Series
STECBE series combines beading and expanding in one
operation reducing individual operations and increasing the efficiency of
the operator. Tube sizes from 25.4mm (1"0 to 76.2mm (3")
Expanders Specialised for Refineries
Tube Expanders for use in refineries are often specifically
size designed to suit particular applications. please contact technical@skatoskalo.co.uk
specifying the tube
Expanders for Heat Exchangers and Condensers
STE800 Series
STE800 series tube expander available in three and five
roller versions for tube sizes from 12.7mm (1/2") to 38.1mm (1
1/2") Tube sheet 12.7mm (1/2") to 57.2mm (2 1/4")
STE900 Series
STE900 series for small tubes. Tube sizes from 12.7mm
(1/2") to 38.1mm (1 1/2") Tube sheet 12.7mm (1/2") to
57.2mm (2 1/4")
STE1200 Series
STE1200 series for small tubes, available in three or five
roller versions. Tube sizes from 12.7mm (1/2") to 38.1mm (1
1/2") Sheet size 12.7mm (1/2") to 57.2mm (2 1/4")
STE 1300 Series
STE1300 series Tube size 10mm (3/8") O.D. Tube sheet
19mm (3/4") to 95.3mm (3 3/4")
STES Series
STES series Tube sizes 6.3mm (1/4") to 31.75mm (1
1/4") O.D. Tube sheet 19mm (3/4") to 31.75mm (1 1/4")
STE-AL Series
STE-AL Series Tube sizes 7.93mm (5/16") to 41.3mm (1
5/8") Tube sheet 15.9mm (5/8") to 25.4mm (1")
Design Capability
Specify the tube size, sheet thickness and configuration with sketch
and we can offer an expander that will perform the task.
