International Limited

Flexible Drives

 

Flex Extension with Toolhead  
Facilitating robust flailing actions for the break up of heavy scale
Flex extensions
Offer total cleaning of tubes where tight radius bends restrict the access of more conventional drives.
Superheater Extensions

Specially designed flex ends for use in superheaters (see S41N, S51N & SH)
Condenser Bearing

 

 For small straight tubes 1/2" (12.7mm) to 3/4" (19mm)
PE Plain End Bearings

 
 for medium to large tubes
Short Scaling Handpiece
 With 2 sealed bearings
Heavy Duty Handpiece
 for very hot straight tubes
Superheater Extension
 For severe bends 5" (125mm) radius

Water Drives

 
With Alkethene Rubber Casing allowing both mechanical cleaning and water/water solution to jointly remove contaminants from the tube.  
  Vacuum Drives
The removal of particulate can be safe and easy with the use of a shrouded vacuum flexible drive. Powered from either air or electric vacuum units, this system is efficient and easy to use.

 

CB Condenser Bearing Handpiece
PEB Plain End Bearing Handpiece
SS Short Scaling Handpiece
SH Superheater Handpiece
S51N Heavy Duty Handpiece
S41N Heavy Duty Handpiece
SP Shearpin
WH Water Handpiece

 

 
Complete Drives
Part No. Series Shaft Dia. Casing Dia. Min. Length Max. Length Fixing Tool End Motor End
SFD5001 CB/SP 6mm 11mm 1m (3ft) 30.5m (100ft) Crimped Soldered 7/32" BSF (M) 1 1/2" Std.
SFD5250 PEB/SP 10mm 16mm 1m (3ft) 30.5m (100ft) Crimped Soldered 5/16" BSF (M) 1 1/2" Std.
SFD5407 PEB/SP 11mm 22mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) 1 1/2" Std.
SFD5503 PEB/SP 13mm 24mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) 1 1/2" Std.
SFD5702 PEB/SP 15mm 29mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) 1 1/2" Std.
SFD5804 PEB/SP 17.5mm 32mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) 1 1/2" Std.
SFD5907 PEB/SP 20mm 34mm 1m (3ft) 30.5m (100ft) Crimped Soldered 1/2" BSW (M) 1 1/2" Std.
S290500 SS/SP 13mm 15mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) 1 1/2" Std.
S290610 SS/SP 15mm 29mm 1m (3ft) 30.5m (100ft) Crimped Soldered 1/2" BSW (M) 1 1/2" Std.
SFD6024 S41N/SP 13mm 24mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) 1 1/2" Std
SFD6029 S51N/SP 15mm 29mm 1m (3ft) 30.5m (100ft) Crimped Soldered 1/2" BSW (M) 1 1/2" Std.
SFD7031 SH/SP 13mm 26mm 1m (3ft) 30.5m (100ft) Crimped Soldered 5/16" BSW (F) 1 1/2" Std.
SFD7040 SH/SP 15mm 31mm 1m (3ft) 30.5m (100ft) Crimped Soldered 5/16" BSW (F) 1 1/2" Std.
 

 
 
Inner Cores Only
Part No. Series Shaft Dia. Min. Length Max. Length Fixing Tool End Motor End
SFD3200 CB/SP 6mm 1m (3ft) 30.5m (100ft) Crimped Soldered 7/32" BSF (M) N/A
SFD3300 PEB/SP 10mm 1m (3ft) 30.5m (100ft) Crimped Soldered 5/16" BSF (M) N/A
SFD3400 PEB/SP 11mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) N/A
SFD3500 PEB/SS/SP 13mm 1m (3ft) 30.5m (100ft) Crimped Soldered 3/8" BSW (M) N/A
 

 
 
Outer Casing Only
Part No. Series Casing Dia. Min. Length Max. Length Fixing Tool End Motor End
SFD3450 PEB 22mm 1m (3ft) 30.5m (100ft) Crimped Soldered N/A 1 1/2" Std.
SFD3551 PEB/SS 24mm 1m (3ft) 30.5m (100ft) Crimped Soldered N/A 1 1/2" Std.
SFD3751 PEB/SS 29mm 1m *3ft) 30.5m (100ft) Crimped Soldered N/A 1 1/2" Std.
 

 
 
Flexible Extensions
Part No. Shaft Dia. Overall Length Connectors
SFE7002-006 13mm 6" (15cm) 3/8" WM to 3/8" WM
SFE6501-08 13mm 8" (20cm) 5/16" WF to 3/8" WF
SFE6506-1025 13mm 10 1/4" (26cm) 3/8" WM to 3/8" WM
SFE6501-1025 13mm 10 1/4" (26cm) 3/8" WF to 3/8" WF
SFE6501-11 13mm 11" (27.9cm) 3/8" WF to 3/8" WF
SFE6501-1125 13mm 11 1/4" (28.5cm) 3/8" WF to 3/8" WF
SFE6506-12 13mm 12" (30cm) 3/8" WM to 3/8" WF
SFE6501-4050 13mm 40 1/2" (103cm) 1/2" WF to M8 F
 

 
 
Water Drives
Part No. Series Shaft Dia. Casing Dia. Min. Length Max. Length Fixing Tool End Motor End
SFD9111 WH/SP 10mm 22.2mm 1m (3ft) 30.5m (100ft) Crimped 5/16" BSF (M) 1 1/2" Std.
SFD9102 WH/SP 13mm 26.9mm 1m (3ft) 30.5m (100ft) Crimped 3/8" BSW (M) 1 1/2" Std.
SFD9103 WH/SP 15mm 26.9mm 1m (3ft) 30.5m (100ft) Crimped 3/8" BSW (M) 1 1/2" Std.
 

 

Flexmaster Assemblies & Parts

Flexmaster power units are all trolley mounted, complete with power take off unit, push button starter with overloads
 
Power Units
Part No. Power Volts Cycles Phase
F130022-24 .75kw 1.0HP 220 60 3
F130022-10 .75kw 1.0HP 415 50 3
F130022-030 .75kw 1.0HP 240 50 1
F130022-33 .75kw 1.0HP 110 50 1
 

 
 
Flexible Drives
Part No. Shaft Dia. Casing Dia Length Handpiece
FFD2306-06 13mm 26mm 1.8m (6ft) N/A
FFD2306-08 13mm 26mm 2.4m (8ft) N/A
FFD6334-06 13mm 26mm 1.8m (6ft) GRI/ARM
 

 
 
Handpiece & Special Fittings
Part No. Description
FHP5357 GRI/ARM
FFA1180 Grinding Wheel Attachment
F500220-600 Complete Drive Clutch Assembly
 

Information Helpline

Quality That Lasts

click here if you don't see a navigation bar down the left hand side of the screen

[ Home ] [ Flexible Drives ] [ Installation Tools ] [ TE Toolheads ] [ Tube Expansion Equipment ] [ Tube Expanders ] [ Specialist Toolheads ] [ Power Units ] [ Nut and Flange Splitters ] [ Leak Detection Equipment ] [ Torque Wrenches ] [ Tube Removal Tools ] [ LT & BT Toolheads ] [ Brushes ] [ Air Motors ] [ About Skatoskalo ] [ Contact Us ]